Specification
Mode | Single mode | Multimode | |
Polish | UPC | APC | PC |
Insertion Loss | ≤ 0.30dB | ≤0.20 dB | ≤0.20 dB |
Return Loss | ≥ 50dB | ≥ 60dB | ≥ 30dB |
Test Wavelength | 1310/1550nm | 850/1310nm | |
Durability(500 Matings) | ≤0.20 dB | ||
Operating Temperature | ℃ | ||
Storage Temperature | ℃ | ||
Fire Resistant | IEC 60794-2-30 | ||
Standards-Compliant | ROHS,IEC and GR-326 |
Product Structure
- The best insertion loss and return loss ensure stable signal transmission and network security.Good thermal stability, high hardness, strong environmental adaptability.
- The best insertion loss and return loss ensure stable signal transmission and network security.Good thermal stability, high hardness, strong environmental adaptability.
- In the case of extreme fiber bending, the optical signal leaked to the outside of the core due to bending is retained to reduce fiber loss and print clearly.
Technical parameters
- Simplex or duplex or multi fiber assemblies
- Riser or Plenum rated, LSZH and RoHS cables available
- Low insertion loss, IEC, TIA/EIA, Telcordia compliant
- Custom fiber optic cable lengths and jacket colors
- Various fiber types and wavelengths, typical 9/125 single mode, 50/125 multimode and 62.5/125 multimode
- 0.9 / 1.8 / 2.0 / 3.0 / mm outer diameter fiber optic cables
- PC, UPC, and APC polish types
- Good packing, competitive prices and very fast delivery
- 100% geometry test anc IEC cleaning test are available
- OEM service is avaibable
Production tests
- Connector end face detection
- Plug back loss test
- 3D Test
Packge Method
Tie the line into the PE bag, the connector head position down, product labels affixed to the middle of the PE bag. The long side of the label is parallel to the bottom edge of the PE bag, finally put it into the carton.